STOMPGRIP Traction Pad Tank Kit Hybrid Volcano FZ07/MT07 2015-2017 55-10-0098H

Product Introduction

■How to Apply Stomp Grips■ 1. Clean the application surface. (If using clear, thoroughly remove dirt and water stains with a compound before proceeding.) 2. Degrease the application surface. 3. Position the application surface. 4. Apply from the edge to prevent air bubbles. Peel off the backing paper as you apply. (If using clear, apply slowly, starting from the edge, gradually and steadily.) Stomp Grips require 24 hours for their adhesive to stabilize. Full adhesion requires 72 hours. If applied before full adhesion, they may peel off or slip off. *Please be especially careful when using Stomp Grips that are attached to the frame. When driving a vehicle equipped with Stomp Grips, wear clothing that prevents direct skin contact with the Stomp Grips. Driving with direct skin contact may result in abrasions and other injuries. The adhesive used in Stomp Grips is very strong. If you forcibly remove the Stomp Grip, the paint may come off with it. (This depends on the condition of the vehicle's paint, but caution is especially important on older vehicles.)

Safety Warning

[Caution] - The adhesive in the Stomp Grip is very strong. - Forcibly removing the Stomp Grip may damage or peel the paint. - To remove the Stomp Grip, warm it with a heat gun or similar to reduce its adhesive strength before removing it. *Please be sure to check the model year of your vehicle before ordering. *We do not accept exchanges or returns after opening. *Depending on when you purchase, the product may be out of stock. *If the product is out of stock, we will order it for you. Compatible Models: FZ07/MT07 2015-2017 Color: Hybrid (Clear & Smoke) Type: VOLCANO Material: Elastomer Resin