Electric Diaphragm Pump Micro Self‑Priming Boost Water Pump DC24V 100W 7L Min 60 Meter Lift

Feature: 1. Using miniature self priming boost pump head and high efficiency direct current motor, with low power consumption, water and energy saving. 2. The rear of the motor is equipped with cooling fan, heats slowly, which can effectively extend the service life of the motor. 3. The interface adopts standardized size, G1 2in male thread connection is convenient, suitable for all kinds of mechanical equipment. 4. The electric diaphragm pump has a lift of up to 60 meters and a flow rate of 7L Min, runs smoothly and efficiently. 5. Commonly used in industrial equipment, household cleaning, agricultural spraying, pipeline pressurization, water purification and treatment equipment, etc. Specification: Item Type: Electric Diaphragm Pump Material: Engineering plastic + aluminum alloy Type: Pressure switch type Model: L0742YD Voltage: 24V Maximum Power: 100W Maximum Pressure: 10kg Working Pressure: 6kg Opening Flow: 7L Min Vertical Suction Lift: Approx. 1.5meter 4.9ft Discharge Lift: Approx. 100meter 328.1ft Maximum Temperature: 100 celsius Male Thread: G1 2in Thread Outer Diameter: Approx. 20mm 0.8in Application Scenarios: Watering flowers, watering vegetables, spraying, spraying pesticides, etc.. Package List: 1 x Electric Diaphragm Pump Note: 1. When the outlet is completely blocked (no water leakage), the power supply will be automatically cut off, the motor will stop, and the water outlet will be turned on again. The matching nozzle hole should not be too small, otherwise the pressure switch in the pump will be damaged, but the nozzle hole should not be too large, otherwise the working pressure will be small.2. It is best to equip with a pressure gauge to test the matching nozzle. If there is no pressure gauge, the nozzle should be large rather than small.3. Please note that the new type and old type of this product will be sent randomly,and make sure you will not mind before ordering.