Electric Bicycle Speed Meter Lcd Display Speed Control Meter Bicycle Modification Accessories

Description: Name: Speed Meter

[Model] SL-SW900YB [Material]_ ABS+LCD liquid crystal instrument [Voltage]_ 24V/36V/48V/52V/60V [Specification]. As shown in the figure below (the line length is about 2 meters) [Weight]_235G [Packaging] Bubble bag Color: Black (As picture show) Material: ABS + LCD Voltage: 24V, 36V, 48V, 52V, 60V Plug: Waterproof Plug Mode: SL-SW900YB Application: E-Bike Motor Conversion Kit Features: (1) Display Function: Speed display, power-assisted gear display, power indicator, fault prompt, total mileage, single mileage, headlights and single driving time display. (2) Control/Setting Function: Power switch control, headlight switch control, 6Km/h boost control, wheel diameter setting, speed limit setting, meter sleep setting, backlight brightness setting, voltage setting. (3) Harness Description: Red (P+) meter power cord Blue (VCC) electric door lock wire Black (GND) negative wire Green (RX) Meter data receiving Yellow (TX) Meter data transmission (4) Meter Setting Function: 1Long press the up and down buttons of the meter to enter the meter settings. P01: Backlight brightness, level 1 is the darkest, level 3 is the brightest. P02: Mileage unit, 0: KM; 1: MILE. P03: Voltage level: 24V, 36V, 48V. P04: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit cucuutes. P05: Power assist gear 1-9 P06: Wheel diameter: unit, inch; precision: 0.1. P07: Number of speed magnets: range: 1-100. P08: Speed limit: speed percentage range 0-100%, 100 means speed 100%. P09: Zero start, non-zero start setting, 0: zero start; 1: non-zero start. P10: Drive mode setting 0: power-assisted drive (the handle is invalid). 1: Electric drive (by turning the handle to drive, the power gear is invalid at this time). 2: Power-assisted drive and electric drive coexist at the same time. P11: Assist sensitivity setting range: 1-24. P12: Assist start intensity setting range: 0-5. P13: Power-assisted magnet type setting There are three types of 5, 8, and 12 magnets, of which 5 and 8 are single Hall power-assisted sensors. 2Setting 12 is used for dual Hall assist sensors. P14: This function is not available yet. P15: This function is not available yet. P16: ODO reset setting, Long press the up button for 5 seconds ODO reset

Packing list: 1 x Speed Meter Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.  Manual measuring,please allow 1-3mm error,thank you.