Glitter Powder with Diverse Colors and Strong Glittering Sense for Embellish Cloisonné Enamel Paintings

Good luck with your favorite purchasesGlitter Powder with Diverse Colors and Strong Glittering Sense for Embellish Cloisonné Enamel Paintings 【Product Features】Strong flash, diverse colors, strong adhesion 【Purpose】Use to embellish the cloisonné enamel painting to enhance the level of the work 【How to use】

The first type: mix the gold powder into the material or mix the glue after the material is dry. The second type: After the material is dried, it is directly mixed with glue. The third type: Use a small brush or powder to brush it on the surface of the material 【Precautions】 1. There is no special attention to the glitter powder during use. You can use the glitter powder to mix and color them together, but in this way, the glitter powder that is transparent on the surface may not be as much visually. 2. If the ingredients are completely dry, then add the glitter powder. We need to make sure that the surface of the material is oily or super glue or coating, and that the surface is dry. We use glue to mix the glitter powder and use a small brush to brush it on. 3. If the glue we mixed is similar to glue such as super glue or oily sand fixing glue, it may cause the surface of the glitter powder to fade. Therefore, be careful not to stain other areas during mixing with this type of glue. 4. If you use powder spray on the entire surface or local area of the picture, be sure to be careful when spraying. If you mix different colors of glitter powder into the powder spray every time you use powder spray, be sure to make sure the powder in front has been cleaned. 5. Some sisters may use glans powder to cover the surface after the background color is wrong. This approach is actually feasible. However, the width of the glitter powder is 0.2mm, so overall, if you want to perform similar operations, try to use more delicate thousand-metal gold powder for micro-operation. 6. Ginger powder cannot be used for firing, this is the flashing process of cloisonné enamel painting on the surface. This material is logically plastic sheets cannot be used for firing. Do not mix the glitter powder into the glaze and burn it. Because it won't work at all. This is used for painting cloisonné enamel. Not for firing. 7. If there is no powder on your hands. You want the entire picture to have astigmatism and not to be too obvious. We can stand a little further and blow it on our hands. If it is a similar approach, we can operate without the glue on the surface material being dry. This allows for direct attachment.