PC817 2/4/8 Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module

modname=ckeditorProduct Introduction:

1.Driving Port Signal Voltage:3.6-24V 2.Output Port Voltage Port:3.6-30V 3.Jumper Cap Can Achieve Output Port Is High POtential Or Pull Down Output 4.Onboard 4-Channel 817 Are Independent:can achieve different voltage control at then same time NOTE: The input port is shared with GND;The output ports are independent of each other;It  is optocoupler output.V and G will be connected after input valid signa in input port.