Kukirin T3 Electric Scooter 800W Motor 48V 15.6AH Battery Adult E-Scooter Speed 45KM/H 58KM Range Load 120KG Foldable Escooter

Ayzeze: Safely charging your e-bike or e-scooter

• Don’t leave your battery unattended while charging, when you're out or while you're asleep

• Don’t cover chargers or battery packs when charging

• Don’t overload sockets or use unsuitable extension chords

• Don’t charge or store batteries in direct sunlight or in areas with temperatures above 45⁰C

• Don’t charge batteries next to combustible materials or hazardous substances

• Always unplug your charger once you have finished charging

• Always make sure to only use the proper proprietary charger

• Always ask a professional when converting your e-bike or e-scooter

• Always check your battery (and charger) for visible damage

-----

Kukirin T3 10-inch Adult Electric Scooter

Product Specifications:

Model: Kukirin T3

Maximum Load Capacity: 120 kg

Top Speed: 45 km/h

Mid-speed Range: ≤58 km

Climbing Ability: ≤20°

Braking System: Front and Rear Disc Brakes + Power-off Brake

Braking Distance: 5-12 meters

Waterproof Rating: IP54

Frame Material: Aluminum Alloy + Iron

Motor Type: Hall Effect Brushless DC Motor (Rear Wheel Single Drive)

Voltage: 48V

Acceleration Mode: Sine Wave

Rated Power: 800W

Instantaneous Maximum Power: 1000W

Battery Type: 18650 Lithium Battery Battery Voltage: 48V

Input Voltage: 100-240VAC~50/60Hz

Input Current: Maximum 2.5A

Output Voltage: 54.6V

Output Current: 2A

Charging Time: 7-8 hours

Front Shock Absorber: Spring Shock Absorber

Rear Shock Absorber: Spring Shock Absorber

Headlight Type: LED

Headlight Power: 6W

Headlight Beam Angle: 45°

Headlight Illumination Area: 5㎡

Turn Signals: Yes

Taillights: Yes, taillights illuminate when headlights are on, and flash when braking.

Size: 10 inches

Type: Tubeless tire

Optimal tire pressure: 300-350 kPa (50 psi)

Type: LED

Display material: ABS

Size: 97*55 mm

Display content: Speed/Power/Mileage/Cruise control/Speed ​​mode/Start mode/Lighting mode/Mileage unit mode

Function settings

1. Power button:

Press and hold for 3 seconds to turn on/off;

A single press turns on/off headlights + spotlights + taillights simultaneously;

Press twice to switch between single mileage and total mileage;

Press and hold the brake button and press 6 times consecutively to remove/restore the speed limiter. (Note: When the signal is triggered, the buzzer will beep, and the brake lever will automatically release.)

2. RGB button:

Press and hold for 3 seconds to turn on the ambient lighting;

Press again to switch the ambient lighting effects, with 4 modes available. Total. (A beep will sound when the signal is triggered.)

3. M Button:

Press once to shift gears,

Press three times consecutively to switch between kilometers/miles,

Press four times consecutively to turn cruise control on/off,

Press five times consecutively to switch between zero-start and non-zero-start modes. (A beep will sound when the signal is triggered.)

4. Left and Right Turn Signals:

Press once to turn the left and right turn signals on/off. (A beep will sound when the signal is triggered.)