IODATA 10G Compatible Switching Loop Detection and Prevention Wall Japanese 8-Port SFP+ 2.5Gbps Hub, Multi-Gigabit Port,

[Equipped with a 10G-compatible SFP+ port] This product is equipped with a 10G-compatible SFP+ port. By preparing an SFP+ module (*) appropriate for your environment, 10Gbps communication using LAN cables or fiber optics is possible. *SFP+ module is not included. *The SFP+ port of this product is only guaranteed to work when using a 10G-compatible SFP+ module. Please refer to the following for recommended SFP+ modules. *SFP modules are not covered by the warranty. [Multi-Gigabit Port Supporting Up to 2.5GbE] With the advent of Wi-Fi 7, network environments are becoming faster. This product supports 2.5G BASE-T, enabling the construction of a high-speed communication environment. In addition to 2.5G BASE-T, it also supports 1000BASE-T and 100BASE-TX, allowing for deployment while utilizing existing equipment. [Wall-mountable] The product has hook holes on the back for wall mounting, and can be installed by attaching screws (*) to the wall. [Supports Loop Detection and Prevention Function] When a network enters a loop state, data continues to be transferred, causing network failures. This product is equipped with a loop detection and prevention function, and automatically blocks the affected port when a loop connection is detected. This prevents network failures that disrupt operations. In addition, when a loop state is detected, the indicator light will blink to notify you. When a loop is detected, communication will be blocked on some of the affected ports, and the LINK/ACT lamp on the port where communication is blocked will blink orange and green simultaneously. *If communication on an SFP+ port is blocked when a loop is detected, the LINK/ACT lamp on the SFP+ port will blink green.