KTEBO Microphone Arm, Low Profile, Desktop Clamp Type, 360° Rotation, Extendable Arm, Cable Clip, Space-Saving Model for Streaming and Recording

[Clear View from a Low Position] The low-profile design makes it easy to place under the monitor or along the back of the desk, minimizing screen obstruction and creating a clean workspace for streaming, meetings, and recording. Check the distance between the edge of the desk and peripherals before installation. It is also convenient when you want to secure space for keyboard and mouse operation. [Adjustable Position with Wide Range of Motion] Equipped with two sections of approximately 320mm arm, the microphone position can be finely adjusted by combining the rotation and up/down angle of each joint. When using, tighten the knob and avoid sudden movements or pushing in unnatural directions. When storing, slowly return the arm to the back of the desk. [Supports Desk Thickness up to Approximately 70mm] Since it is fixed to the desk with a clamp, it can be installed without drilling holes. Protective pads reduce the burden on the contact surface, making it suitable for streaming desks and home office environments. Check the fixation on rounded edges or slanted surfaces. After installation, gently shake the desk to check for any shifting. [Organize Cables] The detachable cable clip at the bottom of the arm can be used to bundle microphone cables, reducing tangling around the movable parts. Leave sufficient slack when adjusting and do not pull the cable too hard or pinch it in the joint. Bundle any excess cable separately and do not put stress on the terminals. [Supports stable microphone installation] The metal arm and tightening knob hold the position and are designed for equipment weighing up to approximately 2.5 kg. Check the total weight of the microphone and holder, and after installation, regularly check each connection and clamp for looseness. The holding condition will vary not only depending on the weight but also on the center of gravity and mounting angle.